|
BDM100 BEYİN PROGRAMLAYICI
FLASH SÖKMEDEN ADAPTÖRLERİ VASITASI İLE DİREK BEYİNİ PROGRAMLAMA
İŞLEMCİSİ MPC5XX SERİSİ OLAN YENİ NESİL ECULARI DESTEKLER
 
| Producer |
Name |
Example car |
Processor |
Eprom |
EEprom |
Probe |
| Bosch |
EDC16 |
VAG, BMW, MB, PSA |
MPC556 |
AM29BL802 |
ST95320 |
BDM143 |
| Bosch |
EDC16+ |
PSA, BMW |
MPC562 |
M58BW016 |
ST95160 |
BDM143 |
| Bosch |
EDC16+ |
VAG |
MPC564 |
M58BW016 |
ST95320 |
BDM143 |
| Bosch |
ME9 Volvo |
Volvo Benziner |
MPC562 |
M58BW016 |
ST95080 |
BDM143 |
| Bosch |
ME9 BMW |
BMW R4 + V8 |
MPC555 |
2 x 28F800F3 |
ST95160 |
BDM143 |
| Bosch |
ME9 BMW |
BMW R4 + V8 |
MPC564 |
M58BW016 |
- |
BDM143 |
| Bosch |
ME9 MB |
MB SLK350 |
MPC564 |
M58BW016 |
ST95160 |
BDM143 |
| Bosch |
MED9 VAG |
VAG 1.6/2.0L FSI |
MPC562 |
M58BW016 |
ST95160 |
BDM143 |
| Bosch |
EDC7 |
MAN, Iveco |
MPC556 |
- |
ST95640 |
BDM143 |
| Bosch |
BMS-K |
BMW K1200RS |
MPC562 |
M58BW016 |
- |
BDM143 |
| Caterpillar |
? |
Massey Ferguson |
MPC555 |
- |
AT25640 |
BDM142* |
| Delphi |
|
Jaguar, Ford 2.0TDCI |
MPC555 |
- |
- |
BDM142* |
| Marelli |
MJD |
Opel, Fiat |
MPC555 |
- |
ST95320 |
BDM144* |
| Siemens |
SID201 |
Jaguar 2.7D |
MPC563 |
M58BW016 |
ST95320 |
BDM141* |
| Siemens |
SID803 |
Volvo Diesel |
MPC555 |
AM29BL802 |
ST95320 |
BDM141* |
| Siemens |
MS45 |
BMW 6-Zyl. |
MPC555 |
AM29BL802 |
ST95320 |
BDM141* |
| Siemens |
MSS65 |
BMW M5 V10 |
MPC563 x 2 |
AM29BDD160 x 2 |
- |
BDM141* + BDM144* |
| Siemens |
SIM266 |
MB A200 |
MPC561 |
AM29BDD160 |
- |
BDM145* |
| Siemens |
Simos 6.x |
Audi A6 2.4L V6 |
MPC561 |
AM29BDD160 |
- |
BDM146* |
| Siemens |
PPD1.1 |
VAG 2.0 TDI |
MPC561 |
AM29BDD160 |
- |
BDM144* |
| Siemens |
MSV70 |
BMW 3.0i |
MPC563 |
AM29BDD160 |
ST95320 |
BDM141* |
| Delphi |
DCM3 |
MB, Kia, Ssangyong |
MPC564 |
? |
? |
BDM147* |
| TRW |
EMS2 |
Volvo trucks, Renault trucks |
MPC565 |
- |
ST95160 |
BDM148 |
BDM 100 is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
BDM 100 requires the ECU to be open, ??on the bench??, as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer).
BDM 100 allows also to create perfect copies of the whole software of an ECU (after having read the original ECU software).
The software allows to read and program the WHOLE ECU content of:
Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved (if the original software has been previously stored).
|
.jpg)
- Önceki
.jpg)
.jpg)
.jpg)
